ZZP Trans Mount

D.I.Y. - ZZP Trans Mount


1. Gather Your Tools / Parts - ZZP Trans Mount - 19 MM Socket - 1/4 Inch Drive Ratchet - 3 Inch 1/4 Inch Drive Extension - Creeper - Jack Stands

2. Park Your Car . Engage Your Parking Brake / E - Brake . Chuck Your Rear Wheels . ! Safety First !

3. Jack Up The Front Of Your Car And Place Your Jack Stands. Locate The Factory Trans Mount.

4. Remove The 2 Bolts Holding The Factory Trans Mount In Place. Remove Factory Trans Mount (Ref Pic 1) 

5. Install Your ZZP Trans Mount (Flat Side Down & Shim Up Top ) Using The 2 Bolt You Removed Earlier - Make Sure You Get And Use The Supplied Spacer.

Note : Masking Tape Shim Into Place Use Bolt To Puncture Tape Makes Install Alot Easier!

6. Once All Tightened Up (Ref Pic 2) Enjoy The VIBES - Sit Back And Enjoy Your Hard Work!